Triboelectric measurement system is used to provide cyclical impact on a piezoelectric sample for its characterization. The frequency and the force can be set using the front panel LCD and buttons. The force inducer plate is made of electrically insulating material. The measurement electronics is not included. Holmarc can supply the measurement electronics separately according to the application requirements, or the user can use their own measurement setup for the characterization. Three models are available which has different frequency ranges (10Hz or 20Hz) and sample thickness requirements (3mm, 15mm or 30mm).
Price | : | $ 4250.00 |
电机类型 | : | AC Servo |
Required range of the force | : | 1N to 100N with 1N increment |
Force repeatability | : | +/- 2N |
Range of frequency | : | 1Hz to 20Hz with 1Hz increment |
Maximum sample thickness | : | 30 mm |
Maximum compression of sample | : | 3 mm |
Maximum sample area | : | 100 x 100 mm |
Built material and finish | : | Anodized Aluminium |
Built material of force inducer plate and sample stage | : | Acetal resin (Delrin) |
Dimensions of sample stage | : | 100 x 100 x 15 mm |
Dimensions of force inducer plate | : | 1) 100 x 100 x 15 mm; quantity: 1No. |
2) 80 x 80 x 15 mm; quantity: 1No. | ||
3) 60 x 60 x 15 mm; quantity: 1No. | ||
4) 40 x 40 x 15 mm; quantity: 1No. | ||
5) 20 x 20 x 15 mm; quantity : 1No. | ||
Force sensor type | : | Load cell |
Interface | : | Controller with LCD display |
Power input | : | 230 ± 10 V 50 Hz |
Price | : | $ 4250.00 |
电机类型 | : | AC Servo |
Required range of the force | : | 1N to 100N with 1N increment |
Force repeatability | : | +/- 2N |
Range of frequency | : | 1Hz to 10Hz with 1Hz increment |
Maximum sample thickness | : | 30 mm |
Maximum compression of sample | : | 15 mm |
Maximum sample area | : | 100 x 100 mm |
Built material and finish | : | Anodized Aluminium |
Built material of force inducer plate and sample stage | : | Acetal resin (Delrin) |
Dimensions of sample stage | : | 100 x 100 x 15 mm |
Dimensions of force inducer plate | : | 1) 100 x 100 x 15 mm; quantity: 1No. |
2) 80 x 80 x 15 mm; quantity: 1No. | ||
3) 60 x 60 x 15 mm; quantity: 1No. | ||
4) 40 x 40 x 15 mm; quantity: 1No. | ||
5) 20 x 20 x 15 mm; quantity : 1No. | ||
Force sensor type | : | Load cell |
Interface | : | Controller with LCD display |
Power input | : | 230 ± 10 V 50 Hz |
Price | : | $ 3500.00 |
电机类型 | : | Stepper |
Required range of the force | : | 1N to 10N with 1N increment |
Force repeatability | : | +/- 2N |
Range of frequency | : | 1Hz to 10Hz with 1Hz increment |
Maximum sample thickness | : | 30 mm |
Maximum compression of sample | : | 20 mm |
Maximum sample area | : | 100 x 100 mm |
Built material and finish | : | Anodized Aluminium |
Built material of force inducer plate and sample stage | : | Acetal resin (Delrin) |
Area of sample stage | : | 100 x 100 mm |
Area of force inducer plate | : | 100 x 100 mm |
Height adjustable sample loading platform | : | Adjustable up to 5 cm |
Force sensor type | : | Load cell |
Interface | : | Controller with LCD display |
Power input | : | 230 ± 10 V 50 Hz |
Home|万博平台网页版登录|Supports|manbetx官网在线登录
|Contact Us
|
©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.